Topics

#opera Icom 7610 CAT and Opera ? #opera

Andrew OBrien
 

I see that the Opera software says "audio by the Rear Connector" .  I don't  use the rear connector .  With other software I just use the sound chip (audio codec) in the Icom.  Also if I choose the Icom 7610 from Jose's drop-down list, the scan does not find the radio.  I do not see anywhere in Opera to double check the CI-V address or change a baud rate.  
Andy K3UK

Andrew OBrien
 

By trial and error I discovered Opera expects a C-IV USB baud rate of 19200.  My 7610 and Opera are now communicating. 

Andy K3UK

Graham
 

Thank's Andy 

The app , should  auto  detect the   settings , its usually  quite  robust,  at least its working , 
after  FT8  was launched ,   activity  on HF all  but  cane to a  end , 
But,  as  you  can see  from the  spot listing ,  the  net  using the  AO-100   sat  remains 
active  with  2.4 GHz up and  10 GHz  down  links ,.  all  showing on the  psk-map as  1296 MHz
the  highest  the  map  shows  

Fixed  2 and 70 cm beacons  in  south  EU F5ZAL  10  watts  to  loop on 2 meters 

And the  136 op32 LF activity , providing  some quite  outstanding  dx  with power levels in 
100 watt  region , [bold = full  decode , other are  correlation  spots , but time  match = ok]

73-Graham 
g0nbd 

2019-11-22 03:53:19 EA5DOM AA KU4XR EM75XR 0 136 -44 Op32__~44dB
2019-11-22 03:53:17 EA5DOM AA G8LCO IO91VU 0 136 -22 Op32_||||||||||||||||||||||||||||||||_~22dB
2019-11-22 03:53:17 EA5DOM AA RX3DHR KO94KS 0 136 -44 Op32__~45dB
2019-11-22 03:53:16 EA5DOM AA    I55387FI JN52HX 0 136 -29 Op32_||||||||||||||||_~30dB
2019-11-22 03:53:14 EA5DOM AA SM2DJK KP03AU 0 136 -27 Op32_||||||||||||||||||||_~28dB
2019-11-22 03:53:14 EA5DOM AA SV8RV KM07KS 0 136 -23 Op32_||||||||||||||||||||||||||||_~24dB
2019-11-22 03:53:13 EA5DOM AA PA0RDT JO11TM 0 136 -18 Op32_||||||||||||||||||||||||||||||||||||||||_~18