Thanks Serge, It does help. BruceN / K4TQL

#ros #varim #RMSexpress #VARA #WinLink

Bruce, I have installed WINE following these instructions : https://wiki.winehq.org/Ubuntu The I have replaced the pdh.dll following the instructions in the previous url discussed. Vara launched witho

#ros #varim #RMSexpress #VARA #WinLink

Serge, Was that all that you needed to do? Were there other instructions to go along with what you cited? BruceN / K4TQL

#ros #varim #RMSexpress #VARA #WinLink

Got it working on a 32bits architecture with Rafael's help. VARA 4.0.6 requires the following dll modification in System32 (https://www.bountysource.com/issues/92142283-idea-for-installing-old-pdh-dll

#ros #varim #RMSexpress #VARA #WinLink

Ros suggests contact , by email :- Rafael Dinitz: rafael AT riseup.net 73-Graham

#ros #varim #RMSexpress #VARA #WinLink

The indication of the problem occurs in the first line. I've gotten VARA to work on ONE machine. Not so successful on three others of varying vintages. I'm using Linuxmint 20.0 and 19.3. I'm also usin

#ros #varim #RMSexpress #VARA #WinLink

Hi, I struggling with installing RMSExpress and Vara. Winlink.org points to K6ETA instructions that for some reasons works for installing RMSExpress but does not for VARA (Vara does not launches...loo

#ros #varim #RMSexpress #VARA #WinLink

Available America's Geostationary satellites to receive with a RTL SDR and old LNB. http://frequencyplansatellites.altervista.org/Beacon-Telemetry_Americas.html How to receive.... https://www.rtl-sdr.

#VARA #WinLink

hmm ... a 1.8m dish has around 30db gain on 2.4 gig ... (with efficiency of 50% ... with 70% it is more 32 db) means with 10w you have an erp of 10kw ... shouldnt that be enough?? https://www.everythi

#VARA #WinLink

with 1w in my 6 footer i have about a kilowatt in erp ... but i have no fear in standing in front of that dish :-) dg9bfc sigi Am 30.11.2018 um 21:10 schrieb AKA via Groups.Io:

#VARA #WinLink

Looks like that calculator is set up for lower frequencies, uncheck the Ground Reflection option, that'll reduce the distance. 1 mW/cm2 figure is for exposure averaged over 30 minutes. In OET Bulletin

#VARA #WinLink

Watch the RF exposure ! 5W into the 35 dbi dish antenna is 60 ft minimum. http://hintlink.com/power_density.htm Correct me, if I am wrong, please.

#VARA #WinLink

Here are a few more possible solutions for the uplink: https://www.minikits.com.au/eme227-12cm https://amsat-dl.org/universeller-empfangsmischer-fuer-eshail-2-amsat-phase-4a https://www.amazon.com/Gre

#VARA #WinLink

Tom , yes that was a design factor , during the Ros hf mode development , the time taken for the arq protocol to execute , would significantly reduce the throughput of the system , the ability of the

#VARA #WinLink

Aha, thanks Graham. That probably explains things. Andy.

#WinLink

Andy, May be a case of misleading stat's , The TRIMODE facility , for some reason, dose not register , VARA connections , those connections will be from the BPQ gateways , which are registering VARA c

#WinLink

Think the latency is too high for ARQ modes. 73 Tom DF5JL Am 28.11.2018 2:16 nachm. schrieb Andrew OBrien <k3ukandy@...>:

#VARA #WinLink

Hi Andy, 10 GHz dongle. We could start by receiving 10 GHz signals like this.... Then hunt around the Southern sky to see what is out there: https://amsat-uk.org/2017/04/21/low-cost-10-ghz-ssb-receive

#VARA #WinLink

Short answer is 'yes' KB6OIL is,looking at it , The modem will automatically Adjust for the link delay , additional Adjustment is available , by the tx delay Intended for repeater use .. 73 Graham G0n

#VARA #WinLink

when the sat is a real transponder and does not hurt the signal then ANY digital mode should work i am guessing for low power voice would be freedv the first choice :-) planned setup for eshail here i

#VARA #WinLink