Sorry, https://rosmodem.wordpress.com

#Software

Excellent digital mode. As fast as Pactor 3 https://www.datv-express.com KC9SGV

#Software

hey youall......what happened to the new vara (any version) software ? was hoping to at least get a look at it. david/wd4kpd

#Software

Hello, I think you might also be referring to this: https://fas.org/man/dod-101/sys/ac/equip/hfgcs.htm I have never seen that network run in anything but classified mode using government crypto keys.

#Software

FYI... Andy K3UK ---------- Forwarded message --------- From: Nils Schiffhauer <DK8OK@gmx.net> Date: Sun, Apr 28, 2019 at 4:35 AM Subject: [UDXF] HFDL analysis made easy: Display Launcher To: <UDXF@gr

#Software

That's good news, Andy, I'm finding , with win-7 , that unless the ic7100 is powered on, the audio drivers are not in the list of audio devices , ie , open the data prog and there is no radio listed ,

#Software

Hi Andy, What digital mode software are you using? I have an IC-7100 which I use for digital, especially Fldigi, Soundmodem and VARA, and my settings are exactly the way I described. Sometimes, especi

#Software

I finally have things back to normal... the odd fix ? Changing the transmit audio path in the digital mode software FROM USB AUDIO Codec to the PC speakers (just for the heck of it) , noting that made

#Software

Oliver, when I do that... the audio from digital mode software plays through the PC speakers NOT the radio. This is despite having the digital mode software set to use the USB Audio Codec. Andy K3UK

#Software

Andy, Just right-click on on your Speakers (High Definition Audio Device) Now select Set as Default Communications Device The green check mark will now only be on Speakers (High Definition Audio Devic

#Software

Andy, May need to try and define some of the other devices , then back to the wanted config , perhaps system restore to before the icom driver was installed check the mixer is not picking the two devi

#Software

This is what I have, still no change. I see there are two green buttons, I am unable to turn off the green button in the Default Communication Device area.

#Software

Andy, you do not want to set your USB Audio CODEC as Default Communications Device nor as Default Device. Your computer internal soundcard should be set to Default Communications Device nor as Default

#Software

Andy Only one of my devices has the 'green tick' your showing two ... ? can you un-tick one of them ? G,

#Software

Hi Andy. You may have heard "If it does not fit, you must acquit." However, a lesser know mantra is, "If it does not compute, you must reboot." Although it will reset *all* of your customizations, in

#Software

My sound settings are attached, software is set for USB Codec as expected. Odd, just checked with a local ham who has same rig and also running Windows 10. Using same settings his works as we would wa

#Software

Andy, Yes, the ic7100 is running with the USB driver , providing , CAT control and Data tx/rx feed Opera is showing , device input microphone [ 5 usb audio codec device out put speakers [5-usb audio c

#Software

Thanks for your reply Graham . I tried changing those settings yesterday , still same outcome . You may be right , I’ll check there again . Your 7100 does not use USB codec ? Andy

#Software

Hi Andy, Im running the IC7100 , that shows up as usb speakers and microphone in [ the microphone , is a non compatibility in windows above win-xp , should be low gain line in] Looking at my win-7 con

#Software

Hmm, I think I am getting senile our something in Windows has changed. Usually we all set our digital mode software to the USB Codec of modern receivers and are thus able to operate digital modes whil

#Software