StateQSOParty.com State QSO Party Challenge - News Release - The StateQSOParty.com Team has announced the 2020 State QSO Party Challenge. This annual program will

Ha! As we start a new decade, here is our first post to this email group from the year 2000! Andy K3UK (ex KB2EOQ)

I've been using MFSK144 on meteor scatter since it was introduced in 2016. It's said to decode better than FSK441 and that does seem to be the case. This video shows several meteor pings decoding

Anyone doing MSK144 these days ? Andy K3UK

David: Thanks for the tip. I'll keep an eye out for HRD updates. Tony -K2MO

Hi Tony, I am also using HRD to log and until the next release HRD will logging will show MFSK - when the QSO gets sent over from WSJTX into the HRD log. Here is how I am dealing with it. in HRD

* AA6YQ comments below Understand the designation, but notice how FT8 is logged in HRD (see attached). It shows FT8 as the mode while FT4 shows up as MFSK. * The ADIF representation for FT8

Dave: Understand the designation, but notice how FT8 is logged in HRD (see attached). It shows FT8 as the mode while FT4 shows up as MFSK. Good to hear from you - hope all is well. Tony -K2MO

+ AA6YQ comments below I've been using HRD to log all WSJT-X contacts in the HRD logbook. It works fine for all modes, but I've noticed that my FT4 contacts are being logged as MFSK. I used the the

All: I've been using HRD to log all WSJT-X contacts in the HRD logbook. It works fine for all modes, but I've noticed that my FT4 contacts are being logged as MFSK. I used the the HRD mode editor to

Beacon remains active still Summery of stations , spotting K3RWR via the opera reporting system range in Km Interestingly , mode op32 , was intended to provide , reliable Transatlantic

If anyone one here has experience configuring aprx, I could use some help. Please contact me directly at NX2I@... and I can provide some details. I have tried to post information over on the APRX

Thank's Andy The app , should auto detect the settings , its usually quite robust, at least its working , after FT8 was launched , activity on HF all but cane to a end , But, as

K3RWR Continues , TX overnight on 136 KHz Providing some interesting results on the path with virtual continuous spots at EA8 , Canary islands no other EU spots , until last night,

By trial and error I discovered Opera expects a C-IV USB baud rate of 19200. My 7610 and Opera are now communicating. Andy K3UK

I'll give a listen for all on that freq now that trans-Atlantic Long Wave season is upon us. Andy K3UK

I see that the Opera software says "audio by the Rear Connector" . I don't use the rear connector . With other software I just use the sound chip (audio codec) in the Icom. Also if I choose the

But I don't see RSID in Mixw4. Andy

New Opera TX station on 136 KHz K3RWR TX ON 136/OP32 1 WATT Bob reports, running 1 watt erp , showing good signal to west in land , during daylight , should cross pond to uk/eu

I am VERY late in evaluating MixW4 but looking at it for the first time today , the GUI is very nice and FT8 integration looks good. Andy K3UK