Thanks Steve, Yahoo groups is a disaster now

Cheap usb sound card and vox Andy, Big problem's with audio bandwith , using the many audio interfaces, especial at vhf, with the high speed Modes, many of the vara installations are bandwith

Andy, All well here, thanks. Yes, the Advantage will work with the FT-2500M too. There isn’t a plug in jumper module for this radio so he will have to wire the pattern manually using the

Hi Sholto, hope you are well. Actually, he is a local club member and you may recall that the club has an Rigblaster Advanatage which is not being used. I will suggest he borrow that for a while. if

Another option are the easy digi boards on eBay and a usb sound card. Then you’ll need some mono 3.5 mm cables, an rj12 jack, and some solder but you could get hooked up for less than $20.

Andy, If he doesn’t feel like homebrewing an interface he might look at the RIGblaster Nomic which comes with cables that will fit the FT-2500M and includes a usb sound card dongle for $69.95

Thanks for the info Steve. Andy

A local new ham has asked for assistance in setting up Fldigi for use with his only 2M radio , an FT2500M. He will experiment with the various Fldigi modes using FM. I can help him with most aspects

Hello All, The Yahoo group is now replaced by: https://groups.io/g/Listen-Before-Transmit The files section has been re-created with the source code fromMARS-ALE/PC-ALE posted as well related

Problem solved The audio codec from the 7100 lists as microphone , whereas the apps where authorised to Use ‘the’ pc microphone , There is a separate , more

Checked , and the access was allowed .. installed the latest driver , still the same , have the 7100 showing as speaker [ 5 usb audio codec] for device out But , the device in

On Win10, search for Microphone Privacy, go to those settings, flip the switch to allow apps to access your microphone. -Scott, NS7C

recently upgraded to win-10 pro , from win-7 [ which worked fine] Odd situation , The audio codec to the PC has disappeared , ie RX audio Only left with the TX audio codec from the

The new VARA FM 3.0 modem Some notable new features in the latest version of the VARA-FM The modem is configured as two bandwidths , as well as automating , level and link set up , whilst

Tx sesion may be over ? , Listing of stations reporting , from both sides of the 'Pond if nothing else , it proves . we had the right parameters for Opera on 136 Dx decodes , show very

Ok Andy A lot work went into the vara modem, I'm sure there are many more uses , that just sending e-mail and files , The 'wrong key , is not an official mod, but, it occured to me,

Interesting Graham. I'll have to update my VARA software. Andy K3UK

I still have the pk232-mbx , wired up , but I doubt the bands are in any condition to make contact , used to take 200/ 250 watts to work the usa east coast on 7 Though,

Just picked this video up Walk round of the latest full Tx/Rx SDR No bigger than a credit card , this one looks to be the real deal full tx/rx 10 MHz to 3 GHz , with 30 MHz sample

New release of MULTIPSK (4.42) Pour les francophones: la version en français de ce message se trouve sur mon site (http://f6cte.free.fr). Il suffit de cliquer sur le lien "Principales