I finally got around to installing VARA Chat today. I recall Jose's previous message stating VARA CHAT is good for emcomm use and not for CQ Hello Bye QSOs. However I had a QSO with someone via

HNY Andy Yes , just the same as the other vara HF modes , the individual carrier rates are 42 baud , 300 never really made much sense, other than b/w linked to speed / rate , far to

HNY Sigi Well , AO-100 has wide and narrow band areas, there are already VARA SAT , which has extended AFC and some link delay measuring modules as well , will also work with any steam

does this keep us in the USA "legal" in terms of FCC imposed baud rates. I can't remember those pesky rules ANdy K3UK -- Andy

hmm .. its a tad bit wide to be used on qo100 ;-) ... ok ok its vara HF ... not vara shf hi hi 100 to 2900 ... sure can you set that in your sdr setup (example a pluto) ... but we

New VARA HF released 4-3-0 New for 2021 , additional 2750 Hz bandwidth mode added to the VARA family utilising available bandwidth, maximum rate is increased to 8489 Bps in 2750 Hz

Hello to all the digital folks out there. A new program for the Shortwave Radiogram broadcasts has now been posted on the SW Radiogram website. If you're new to decoding digital, this is a pretty

https://youtu.be/fGKE4tjWRSo FYI Andy

Thanks Serge, It does help. BruceN / K4TQL

Bruce, I have installed WINE following these instructions : https://wiki.winehq.org/Ubuntu The I have replaced the pdh.dll following the instructions in the previous url discussed. Vara launched

Serge, Was that all that you needed to do? Were there other instructions to go along with what you cited? BruceN / K4TQL

Got it working on a 32bits architecture with Rafael's help. VARA 4.0.6 requires the following dll modification in System32

Radio Northern Europe International has announced its Christmas special (which includes a digital portion), which starts broadcasting on the 23rd. See

Yes good point John With this ''not selected'' it's not possible to route audio from a app running on say sdr & fire fox to data app , vara , fldigi etc using the internal audio

Windows often has a "Stereo Mix" device to receive what you are sending. On a couple of machines it disapeared with an update, but these ideas fixed it (One on each machine)

Andy - May or may not be the same , this was the resolve of the missing ''one of the '' audio usb links from the ic7100 ..full final,post in 7100 group ..may be the same for the audio

Andy There was something odd round win10 and the ic7100 missing one of the usb audio feeds , needing the device in windows to be 'identified' or similar .. there are two or three

Use two computers and pipe the sound from one to the other. You can try this program. Seems to work fair for me sometimes. VB-Audio VoiceMeeter VB-Audio VoiceMeeter Vincent Burel VoiceMeeter

In the old days, we used to choose a "listen to this device" option in the Windows "Recording" tab when wanting to hear the audio that VAC was piping to our digital mode software. I looked again for

Ros suggests contact , by email :- Rafael Dinitz: rafael AT riseup.net 73-Graham